ADVANTAGES AND CONSTRUCTION PROCESS OF OIL-BASED EPOXY

Oil-based epoxy paint is the first product of the epoxy paint line appearing in Vietnam. Although there are many epoxy paint products on the market, oil-based paints are still popular with consumers.

Oil-based epoxy paint is a 2-component paint consisting of oil-based and solvent-based. Therefore, during use, users will have to mix paint at a rate of 5 to 10% depending on each product line.

Currently, this epoxy oil-based paint is often used for concrete floors because it possesses the following advantages:

– Extremely high bearing capacity, anti-abrasion

– Capable of increasing the adhesion between concrete and coating layers

– Painted surface after the application is very hard

– The ability to withstand the corrosion of acids with mild concentrations…

The construction of epoxy paint of this type is quite simple, before using the user needs to mix the components of the paint according to the ratio given by the manufacturer. Then use a mobile drill to stir each ingredient separately, then mix the ingredients together and continue stirring until the ingredients become a homogeneous mixture.

>> Click HERE for industrial chemicals on the market <<

Construction tools
Here are some tools you need to prepare to apply this oil-based epoxy paint: Paint roller, paint mixer, sander, vacuum cleaner, concrete floor grinder, plaster knife, brush, paint sprayer …

Some notes before painting
With this type of epoxy paint, you absolutely must not paint in wet surfaces and environments, where humidity is 90%, in addition, the paint application temperature should not be less than 20 degrees Celsius.

How to apply oil-based epoxy paint
Before proceeding with painting, you need to check the surface of the concrete floor, the floor surface must be finished about 30 days before painting, the floor must be firm, the humidity must not exceed 90% and create a roughness for the surface. by sanding machine.

In addition, before applying primer, you need to make sure the concrete floor surface is flat and plaster all the protrusions.

After mixing the oil-based epoxy paint mixture, use a spray gun or roller to evenly paint on the concrete surface to be painted. Then wait for this first coat to dry for 1 to 1 hour 30 minutes at a temperature of 30 degrees Celsius.

After the first layer of paint dries, you will proceed to apply the second coat after about 4 to 6 hours, this time will depend on the surface of the concrete floor. Therefore, to ensure accuracy, you need to check and roll an area in advance.

Some notes in the process of applying oil-based epoxy paint
This oil-based epoxy paint is actually a volatile solvent, so when you apply it, you need to ensure that it is applied for the right purpose and precisely to ensure that it does not affect the environment.

Absolutely do not apply in environments with too high humidity, higher than 90%.

After mixing the paint mixture, it should be used for about 1-2 hours to prevent the paint from hardening.

Above we have shared with you the basic information about oil-based epoxy paint. Hope this article helps you better understand this epoxy paint.

Mega Vietnam General Trading Limited Company specializes in providing on the market YD011X75 resin (Kukdo-Korea), YD011X75 (Epotech-Thailand), curing agent G5022 (Kukdo-Korea)… Looking forward to receiving your support. customer support. If you have any questions or need about the product, please contact our company.

>>>Click HERE to get advice on technical solutions during product construction<<<

Contact

MEGA VIETNAM

Office address: Floor 2-A2-IA20, Nam Thang Long Urban Area, Pham Van Dong Street,

Dong Ngac Ward, Bac Tu Liem District, Hanoi City, Vietnam

Tel: (+84) 24 375 89089; Fax: (+84) 24 375 89 098

Website: megavietnam.vn

Hotline: 1800.577.728 Zalo: 0971.023.523