INTRODUCTION OF EPOXY SELF LEVELING

INTRODUCTION TO EPOXY SELF-LEVELING PAINT

1. Definition

Epoxy Self Leveling paint is a 2-component epoxy coating, consisting of coating and curing ingredients, no solvents, operating on the principle of surface balance. If the coating thickness is more than 3 mm, it will conceal the defects of the concrete floor, when pouring the epoxy paint onto the floor surface, this paint will flow evenly to create a glossy, absorbent paint film with a good aesthetic.

Self-leveling epoxy paint is a two-component epoxy paint series, which can be called self-balancing epoxy paint, self-leveling paint, or self-flowing epoxy paint can be painted with many different thicknesses.

Self-leveling epoxy paint is only used for concrete floors, tile floors, wood. It can self-balance the surface when mixing 2 components.

2. Advantages

- High self-leveling ability

- Waterproof, oil resistance, and water resistance

- High load capacity, corrosion resistance

- Good anti-slip ability

- For some famous paint companies Sika, Jotun, KCC, Chokwang, the self-leveling epoxy paint also meets the requirements of GMP, WHO, GPS, GPL ...

>>>Click HERE for free construction consulting<<<< />pan>

Sơn epoxy tự san phẳng

Self-leveling epoxy paint

3. Applications

- Pharmaceutical and food factory floors

- Building basements, parking lots, car garages

- Factory

- Office floor

- The floors require high aesthetics, load capacity, abrasion, and smooth surfaces

4. Self-leveling epoxy floor coating process for the workshop floor

The steps of self-leveling epoxy floor coating are the same as those of 3-coat coating, except for self-leveling coating. For self-leveling floor paint, the workers must be highly skilled, have applied this coating many times because if it has not been done or done a little, the surface is easy to rough, when using semi-serrated scissors to pull. The paint can easily cause drag marks to deteriorate the surface, the surface is thin, each application team must be at least 5 people in which: one person pulls the paint, one uses the spiked roller to break the air bubbles, one pours paint, one applies paint, one tests the surface.

Some notes when applying self-leveling epoxy floor paint:

- Not use solvent, otherwise, it will cause roughness and wrinkling of the epoxy coating surface

- The paint mixing ratio must be exactly as given by the manufacturer.

- Use a paint mixer to the right machine and the rate of rotation per minute, mixing time is at least 10 minutes

- Do not mix paint too much that easily cause curing, must rely on the number of construction workers to mix

- Must know the appropriate construction zoning if not easy to cause the connection between 2 application times and color difference.

- The surface of a weak concrete surface can easily peel off when painted, so for these kinds of floors, it is necessary to treat it with epoxy mortar before applying a self-leveling epoxy coating.

Currently, Mega Vietnam Chemical has been developing many material sets for this Epoxy paint. Especially plastic products of Kukdo (Korea), Kumho (Korea), Epotec (Thailand). With a curing set imported directly from famous brands in the world and a team of experienced technicians, Mega is always a reliable partner and accompanies you to success.

Contact